Changing External Hard Drive From Read Only to Read and Write

Most of us use some kind of external storage device with our Mac at some time or another, whether it's a USB stick, flash drive, external hard disk, or SSD. Most of the time, there's no problem. However, you may encounter errors now and again, and one of the most common is that your Mac is unable to write to the disk. You may see a message telling you that the drive is read-only. Fortunately, it's not too difficult to fix the problem. In this article, we'll show you how.

What causes the "read-only" error?

There are two possibilities when you see a message telling you a hard drive, USB stick, or other external storage media is read-only.

  1. The drive is formatted in a way that means your Mac can read it but not write to it. This can happen with disks that are formatted as NTFS.
  2. Some permissions settings prevent your Mac or your user account from writing to the disk.

To determine which of these is causing the problem, select the disk in the Finder and press Command-I, or right-click it and choose Get Info.

Under General, you should see a list of parameters. Look at the one named Format. If it says NTFS, that's the problem.

If the Format is APFS, macOS Extended, or FAT 32, then that is not the problem, and you'll need to check permissions.

  1. Look at the bottom of the Get Info window.
  2. Under Sharing & Permissions, it will tell you what access you have. If it says "read-only," you know the problem is permissions-related.

Tip:

CleanMyMac X's Maintenance module allows you to repair broken permissions on a disk with a couple of clicks. That might be all you need to do to fix problems with only being able to read from external disks.

Repair disk permissions in Maintenance module CMMX

How to change permissions on an external hard drive on your Mac

The following applies whether the drive in question is a hard drive, USB stick, SSD, or any other external media. There are several options, depending on what you identified as causing the problem.

How to fix hard drive read-only issue

There are two options here. One is to reformat the drive to a format your Mac can write to as well as read. This will wipe all the data from it, so you should make a backup or manually copy important files to another location first. Depending on how you format it, it may also cause problems if you need to use the drive with a Windows PC. So, only choose this option if you know the drive will only be used with Macs in the future.

The other option is to use third-party driver software to enable your Mac to write to an NTFS-formatted disk. There are a number of paid-for and some free options available.

How to reformat an external drive:

  1. With the drive plugged into your Mac, go to Applications > Utilities and launch Disk Utility.
  2. Choose the external disk in the Disk Utility sidebar.
  3. Select the Erase tab.
  4. Type in a name for the reformatted drive.
  5. Select MacOS Extended (Journaled) from the dropdown menu.
  6. Press Erase.
  7. The drive will be wiped, reformatted, and when it's done, your Mac will be able to write to it.

How to fix permissions problems

If the drive is correctly formatted for the Mac and you can't write to it, the problem is likely to be related to permissions. Here's how to fix it.

  1. Select the drive in the Finder.
  2. Press Command-I to display the Get Info window.
  3. At the bottom of the window, click the arrow next to Sharing & Permissions to display permissions.
  4. Click on the Privilege menu next to your username and choose Read & Write.
  5. Close the Get Info window.

If your user account is not an admin user, you may have to use the padlock to unlock permissions settings and type in an admin username and password. You may also need to restart your Mac to get the change to take effect.

In some circumstances, you may not be able to change permissions in the Finder, or doing so may not fix the problem. If that happens to you, the next step is to use Disk Utility to fix the disk.

  1. Go to Applications > Utilities and launch Disk Utility.
  2. Select the external disk in the sidebar.
  3. Click on First Aid.
  4. Press Run to confirm that you want to try and repair the disk.

In versions of macOS up to and including macOS 10.10 Yosemite, you could use Disk Utility to repair permissions. The option appears in the First Aid tab with two buttons, one to verify and one to repair permissions. If you are running a version of macOS where these options are available, you should use them instead of the steps described above.

If you encounter an issue where a hard drive is read-only on your Mac, or perhaps a USB stick or flash drive, it may be that it is formatted as NTFS, which can be read by macOS but not written to. It may also be a permissions issue. If you follow the steps in this article, you'll be able to identify which it is and fix it quickly.

Changing External Hard Drive From Read Only to Read and Write

Source: https://macpaw.com/how-to/hard-drive-read-only-permission

0 Response to "Changing External Hard Drive From Read Only to Read and Write"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel